Supply of Stationary Digital X-ray System for 2 working places to Ukraine

Reference: ITB/2020/15052

Description: Supply of Stationary Digital X-ray System for 2 working places to Ukraine.

X-ray system configuration:

• system based on floor-mounted
• X-ray diagnostics table
• X-ray stand
• X-ray high-voltage generator (power supply)
• X-ray emitter (generator)
• Flat Panel Detector in the table and in the stand
• Digital system of image processing

X-Ray Diagnostics table

• Size of the table surface - not less than 2010 х 820 mm
• Adjusting the height of the table above the floor - In the range of 500 to 800 mm
• Table load - not less than 220 kg
• Table side-to-side movement range - not less than 1000 mm
• The range of flat detector motorized lengthwise motion - not less than 500 mm
• Distance between the table surface and flat detector - not more than 70 mm
• Grid available
• Tube motorized vertical movement available
• Focus to floor distance - not less than from 350 to 2000 mm
• Horizontal and vertical auto-tracking function available
• Touch screen colour display interface for movement control - not less than 7.5 inch

X-ray stand

• Vertical movement range (align top) - In the range of 400 to 2000 mm
• Motorized vertical movement - not less than 1600 mm
• Grid available
• Vertical auto-tracking function available

X-ray radiation formation system

• Maximum generator power - not less than 50 kW
• Current adjustment range in radiography mode - not less than 10 – 600 mA
• Voltage adjustment range in radiography mode - not less than 40 – 150 kV
• Automatic exposure adjustment function available
• X-ray tube focal spots number - not less than 2
• Focal spot size - not more than 0.6 mm and 1.2 mm
• Anode X-ray tube heating capacity - not less than 600 000 thermal units
• Collimator with irradiation field illumination available
• Dose meter (DAP) available

Two Flat Panel Detectors: in the Table (1) and in the stand (1)

• Input field size - (43 × 43) ± 1 cm
• Image Matrix - not less than 2800×2800
• Pixel size - not more than 150 microns
• DQE magnitude at 0 pairs of lines/cm - not less than 60%

Digital System of image processing

• Saving images: hard disk capacity not less than 500 GB in mirror-image mode
• Laboratory Assistant Workstation
• Image postprocessing mode with the ability to:
• Adjust brightness
• Use compensational filters
• Rotate images
• Invert images
• Increase (magnify)
• Annotate
• DICOM Network connection: Store, Print
• Touch screen (sensor) remote control for exposure settings
• LCD monitor with a diagonal of not less than 19": to view current images
• Ability to record data reports on CD and DVD using DICOM file viewer program

Accessories and other equipment

• Patient radiation exposure measuring device
• Power distribution panel
• UPS (Uninterrupted power supply) for digital system
• Protective lead glass, non-framed - not less than 1000 x 900 mm

Maximum weight of the whole system (the installation premises can not sustain heavier weight) - not more than 1500kg