UKRI-2650 High Precision 3D Printer

UK-Swindon: Printers and plotters.
Section I: Contracting Authority
I.1) Name and addresses
UK Research & Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Tel. +44 7849307911, Email: STFCprocurement@ukri.org
Contact: STFC Procurement
Main Address: www.ukri.org
NUTS Code: UKK14
I.2) Joint procurement
The contract involves joint procurement: No.
In the case of joint procurement involving different countries, state applicable national procurement law: Not provided
The contract is awarded by a central purchasing body: No.
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at: https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Printers-and-plotters./229DHHH3QE
Additional information can be obtained from: the abovementioned address
Tenders or requests to participate must be sent to the abovementioned address
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at: Not provided
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Other activity:

Section II: Object
II.1) Scope of the procurement
II.1.1) Title: UKRI-2650 High Precision 3D Printer
Reference Number: Not provided
II.1.2) Main CPV Code:
30232100 - Printers and plotters.

II.1.3) Type of contract: SUPPLIES
II.1.4) Short description: The Central Laser Facility (CLF), part of UK Research and Innovation’s (UKRI) Science and Technology Facilities Council (STFC) is seeking to procure a high precision 3D printing machine.
II.1.5) Estimated total value:
Value excluding VAT: 150,000
Currency: GBP
II.1.6) Information about lots:
This contract is divided into lots: No

II.2) Description

II.2.2) Additional CPV codes:
Not Provided
II.2.3) Place of performance:
UKJ14 Oxfordshire

II.2.4) Description of procurement: The Central Laser Facility (CLF), part of UK Research and Innovation’s (UKRI) Science and Technology Facilities Council (STFC) is seeking to procure a high precision 3D printing machine.

The scope of the contract is supply, delivery, installation, training and commissioning of one high precision 3D printing machine to enable the production of micro-components for use in laser targets. This instrument is to enhance the capability that exists in TFAB for low resolution (50um) printing, to allow parts to be fabricated that cannot be printed on the existing systems.

The maximum available budget for this purchase is £150,000 excl. VAT. Any bids received above this will not be considered.
II.2.5) Award criteria:
Criteria below
Quality criterion - Name: Quality / Weighting: 70

Cost criterion - Name: Price / Weighting: 30

II.2.6) Estimated value:
Value excluding VAT: 150,000
Currency: GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system:
Start: 13/02/2023 / End: 31/03/2023
This contract is subject to renewal: No
Description of renewals: Not provided

II.2.10) Information about variants:
Variants will be accepted: No
II.2.11) Information about options:
Options: No
Description of options: Not provided
II.2.12) Information about electronic catalogues:
Tenders must be presented in the form of electronic catalogues or include an electronic catalogue: No
II.2.13) Information about European Union funds:
The procurement is related to a project and/or programme financed by European Union funds: No
Identification of the project: Not provided
II.2.14) Additional information: Not provided

Section III: Legal, Economic, Financial And Technical Information
III.1) Conditions for participation
III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions:
Not Provided
III.1.2) Economic and financial standing
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.3) Technical and professional ability
List and brief description of selection criteria:
Not Provided
Minimum level(s) of standards possibly required (if applicable) :
Not Provided
III.1.5) Information about reserved contracts (if applicable)
The contract is reserved to sheltered workshops and economic operators aiming at the social and professional integration of disabled or disadvantaged persons: No
The execution of the contract is restricted to the framework of sheltered employment programmes: No

III.2) Conditions related to the contract

III.2.2) Contract performance conditions
Not Provided
III.2.3) Information about staff responsible for the performance of the contract
Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract: No

Section IV: Procedure
IV.1) Description OPEN
IV.1.1) Type of procedure: Open

IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement - NO
In the case of framework agreements justification for any duration exceeding 4 years: Not Provided


IV.1.6) Information about electronic auction:
An electronic auction will be used: No
Additional information about electronic auction: Not provided
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure:
Notice number in the OJ S: Not provided
IV.2.2) Time limit for receipt of tenders or requests to participate
Date: 19/01/2023 Time: 11:00

IV.2.4) Languages in which tenders or requests to participate may be submitted: English,
IV.2.6) Minimum time frame during which the tenderer must maintain the tender:
Duration in month(s): 3

IV.2.7) Conditions for opening of tenders:
Date: 19/01/2023
Time: 11:00

Section VI: Complementary Information
VI.1) Information about recurrence
This is a recurrent procurement: No
Estimated timing for further notices to be published: Not provided
VI.2) Information about electronic workflows
Electronic ordering will be used Yes
Electronic invoicing will be accepted Yes
Electronic payment will be used Yes
VI.3) Additional Information: For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Printers-and-plotters./229DHHH3QE

To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/229DHHH3QE
VI.4) Procedures for review
VI.4.1) Review body:
UK Research & Innovation
Polaris House, North Star Avenue, Swindon, SN2 1FL, United Kingdom
Email: commercial@ukri.org
VI.4.2) Body responsible for mediation procedures:
TBC
TBC, United Kingdom
VI.4.3) Review procedure
Precise information on deadline(s) for review procedures:
Not Provided
VI.4.4) Service from which information about the lodging of appeals may be obtained:
UK Research & Innovation
Science & Technology Facilities Council, Rutherford Appleton Laboratory, Harwell, Oxford, OX110QX, United Kingdom
Email: STFCProcurement@ukri.org
VI.5) Date Of Dispatch Of This Notice: 12/12/2022